疑難芯片解密-ATtiny28L解密

來源：IC解密的了解，我們提供C8051F713單片機的主要功能特征介紹以供參考，以便為后續的技術合作和項目溝通提供方便。針對芯片解密，耐斯迪解密事業部早先就曾針對客戶的解密需求進行過方案開發，而近期在該芯片解密中的技術突破將為更多客戶帶來實實在在的利益。
　　以下是我們對ATtiny28L單片機的簡單介紹供各位參考：
　　The ATtiny28 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture.By executing powerful instructions in a single clock cycle, the ATtiny28 achieves throughputs approaching 1 MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed. The AVR core combines a rich instruction set with 32 general-purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
　　ATtiny28L  Features
　　Utilizes the AVR? RISC Architecture
　　AVR - High-performance and Low-power RISC Architecture
　　- 90 Powerful Instructions - Most Single Clock Cycle Execution
　　- 32 x 8 General-purpose Working Registers
　　- Up to 4 MIPS Throughput at 4 MHz
　　Nonvolatile Program Memory
　　- 2K Bytes of Flash Program Memory
　　- Endurance: 1,000 Write/Erase Cycles
　　- Programming Lock for Flash Program Data Security
　　Peripheral Features
　　- Interrupt and Wake-up on Low-level Input
　　- One 8-bit Timer/Counter with Separate Prescaler
　　- On-chip Analog Comparator
　　- Programmable Watchdog Timer with On-chip Oscillator
　　- Built-in High-current LED Driver with Programmable Modulation
　　Special Microcontroller Features
　　- Low-power Idle and Power-down Modes
　　- External and Internal Interrupt Sources
　　- Power-on Reset Circuit with Programmable Start-up Time
　　- Internal Calibrated RC Oscillator
　　Power Consumption at 1 MHz, 2V, 25°C
　　- Active: 3.0 mA
　　- Idle Mode: 1.2 mA
　　- Power-down Mode: <1 μA
　　I/O and Packages
　　- 11 Programmable I/O Lines, 8 Input Lines and a High-current LED Driver
　　- 28-lead PDIP, 32-lead TQFP, and 32-pad MLF
　　Operating Voltages
　　- VCC: 2.7V - 5.5V for the ATtiny28L
　　Speed Grades
　　- 0 - 4 MHz For the ATtiny28L